BIOS

「BIOS」の編集履歴(バックアップ)一覧はこちら

BIOS」(2017/05/24 (水) 13:55:12) の最新版変更点

追加された行は緑色になります。

削除された行は赤色になります。

-黒字…初期値にリストアした場合の設定値 -&color(blue){青字}…推奨される設定変更値および解説 -&color(red){赤字}…注意事項または注釈 ※ 誤記や補足説明などありましたら更新お願いします。 ※ 設定変更などでパフォーマンス向上や不具合回避報告がありましたら更新お願いします。 ※ 任意のバージョンへのアップグレード・ダウングレードは対象のアップデータの実行で可能です。 ※ 書き換えに失敗した場合(コンソール赤背景)は再度実行することで修復出来る事があります。 #region(open,BIOS項目一覧 2016/11/18版) *BIOS項目一覧(2016/11/18版) //========== Main ========== #region(close,Main) *Main |>|>|&bold(){BIOS Infomation}| |BIOS Vendor|American Megatrends|| |Core Version|5.011|| |Compliancy|UEFI 2.4; PI 1.3|| |Project Version|1ARXP 0.57 x64|| |Build Date and Time|18/11/2016 16:29:41|&color(red){11/18版の表示}| |>|>|&bold(){CPU Configuration}| |Microcode Patch|362|| |>|>|&bold(){Memory Information}| |Total Memory|4096 MB (DDR3)|| |>|>|&bold(){GOPInformation}| |Intel(R) GOP Driver|8.0.1038|| |>|>|&bold(){TXE Information}| |Sec RC Version|00.05.00.00|| |TXE FW Version|02.00.02.3095|| |>|>|-| |System Language|[English]|| |>|>|-| |System Date|&italic(){[ddd MM/DD/YYYY]}|| |System Time|&italic(){[hh:mm:ss]}|| |>|>|-| |Accsess Level|Administrator|| #endregion //==========Boot========== #region(close,Boot) *Boot |>|>|&bold(){Boot Configuration}| |Setup Prompt Timeout|1|| |Bootup NumLock State|[On]|| |>|>|-| |Quiet Boot|[Enabled]|| |Fast Boot|[Enabled]|| | SATA Support|[All Sata devices]|| | VGA Support|[EFI Driver]|| | USB Support|[Partial Initial]|| | PS2 Support|[Disabled]|| | Network Stack Driver|[Disabled]|| |>|>|-| |>|>|&bold(){Boot Option Priorities}| |Boot Option #1|Windows Boot Manager|| |Boot Option #2|UEFI: Built-in EFI …|| #endregion //==========Save&Exit========== #region(close,Save&Exit) *Save&Exit |Save Changes and Exit|&color(red){設定後は保存して終了}| |Discard Changes and Exit|| |Save Changes and Reset|| |Discard Changes and Exit|| |>|-| |>|&bold(){Save Options}| |Save Changes|| |Discard Changes|| |Restore Default|| |Save as User Defaults|| |Restore User Defaults|| |>|-| |>|&bold(){Boot Override}| |UEFI: Built-in EFI Shell|| |Windows Boot Manager|| |Launch EFI Shell from filesystem device|| |Reset System with ME disable Mode|| #endregion #endregion #region(open,BIOS項目一覧 2016/10/25版) *BIOS項目一覧(2016/10/25版) //========== Main ========== #region(close,Main) *Main |>|>|&bold(){BIOS Infomation}| |BIOS Vendor|American Megatrends|| |Core Version|5.011|| |Compliancy|UEFI 2.4; PI 1.3|| |Project Version|1ARXP 0.57 x64|| |Build Date and Time|10/25/2016 10:43:29|&color(red){10/25版の表示}| |>|>|&bold(){CPU Configuration}| |Microcode Patch|362|| |>|>|&bold(){Memory Information}| |Total Memory|4096 MB (DDR3)|| |>|>|&bold(){GOPInformation}| |Intel(R) GOP Driver|8.0.1038|| |>|>|&bold(){TXE Information}| |Sec RC Version|00.05.00.00|| |TXE FW Version|02.00.02.3095|| |>|>|-| |System Language|[English]|| |>|>|-| |System Date|&italic(){[ddd MM/DD/YYYY]}|| |System Time|&italic(){[hh:mm:ss]}|| |>|>|-| |Accsess Level|Administrator|| #endregion //==========Advanced========== #region(close,Advanced) *Advanced //-----Trusted Compuring----- #region(close,Trusted Compuring) &bold(){Trusted Compuring} |>|>|TPM20 Device Found| |>|>|-| |Security Device Sup|[Enabled]|| |Active PCR banks|S|| |Available PCR Banks|S|| |>|>|-| |TPM State|[Enabled]|| |Pending Operation|[None]|| |Platform Hierarchy|[Enabled]|| |Storage Hierarchy|[Enabled]|| |Endorsement Hierarc|[Enabled]|| |TPM2.0 UEFI Spec Ve|[1.0]|| |TPM 20 InterfaceTyp|[CRB]|| |Device Select|[Auto]|| #endregion //-----ACPI Setting----- #region(close,ACPI Setting) &bold(){ACPI Setting} |Enable ACPI Auto Conf|[Enabled]|| #endregion //-----Serial Port----- #region(close,Serial Port) &bold(){Serial Port} |>|>|&bold(){COM 0}| |Console Redirection|[Disabled]|| |>|>|Condole Redirection Settings| |>|>|-| |>|>|&bold(){Legacy Console Redirection}| |>|>|Legacy Console Redirection Settings| |>|>|-| |>|>|&bold(){Serial Port for Out-ofBand Management/&br()Windows Emergency Management Service (EMS)}| |Console Redirection|[Disabled]|| |>|>|Console Redirection Settings| #endregion //-----CPU Configuration----- #region(close,CPU Configuration) &bold(){CPU Configuration} |>|>|&bold(){Socket 0 CPU Infomation}| |Intel(R) Atom(TM) x7-Z8700 CPU @ 1.60GHz||&color(blue){先行機種一部はx7-Z8750あり}| |>|>|-| |CPU Signature|406c3|| |Microcode Patch|362|| |Max CPU Speed|1600 MHz|| |Min CPU Speed|480 MHz|| |ProcessorCores|4|| |Intel HT Technology|Not Supported|| |Intel VT-x Technology|Supported|| |>|>|-| |L1 Data Cache|24 kB x 4|| |L2 Data Cache|32 kB x 4|| |L2 Cache|1024 kB x 2|| |L3 Cache|Not Supported|| |>|>|&bold(){CPU Thermal Configuration}| |DTS|[Disabled]|| |CPU Speed|1600 MHz|| |64-bit|Supported|| |>|>|-| |Limit CPUID Maximum|[Disabled]|| |Bi-directional PROCHO|[Enabled]|| |Intel Virtualization|[Enabled]|| |Power Technology|[Energy Efficient]|| #endregion //-----PPM Configuration----- #region(close,PPM Configuration *) **PPM Configuration |EIST|Enabled|| |CPU C State Report|Enabled|| |Max CPU C-state|C7&color(blue){→C6またはC1}|&color(blue){10/25より前のBIOSではスリープ中の電源断回避可能}| |SOix|Enabled|| #endregion //-----Thermal----- #region(close,Thermal) &bold(){Thermal} |>|>|&bold(){Thermal Configuration}| |>|>|Thermal Configuration Parameters&br()Dynamic Platform&Thermal Framework| |DPTF|[Enabled]|| |>|>|-| |Intel® DPTF Processor|[Enabled]|| |Critical Trip Point|[90 C]|| |Passive Trip Point|[85 C]|| |>|>|-| |>|>|Intel® DPTF Skin Hotspot Proxy Senser| |Intel® DPTF Skin Hots|[Enabled]|| |Critical|[90 C]|| |Passive|[57 C]|| |>|>|-| |>|>|Intel® DPTF Ambient Estimation Participant| |Intel® DPTF Ambient E|[Disabled]|| |Critical|[85 C]|| |Passive|[52 C]|| |>|>|-| |>|>|Intel® DPTF Charger-Display Senseor Participa...| |Intel® DPTF Changes-d|[Enabled]|| |Critical|[85 C]|| |Passive|[52 C]|| |>|>|-| |>|>|Intel® DPTF Charger Bord Senser Participant| |Charger Board Sensor|[Disabled]|| |Critical|[85 C]|| |Passive|[61 C]|| |>|>|-| |>|>|Intel® DPTF Charger Participant| |Intel® DPTF Charger P|[Enabled]|| |>|>|Intel® DPTF Display Participant| |Intel® DPTF Display P|[Enabled]|| |Display High Limit|100|| |Display Low Limit|40|| |>|>|Intel® DPTF Power Participant| |Intel® DPTF Power Par|[Enabled]|| |>|>|-| |>|>|Intel® Ambient Temperture Participant| |Intel® Ambient Temper|[Enabled]|| |Ambient Constant Sign|[+]|| |Ambient Constant 0|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 1|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 2|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 3|0|| |Ambient Constant Sign|[+]|| |Ambient Constant 4|0|| |Ambient Constant Sign|[+]|| |Ambient Constant 5|0|| |>|>|-| |>|>|Ambient Based Trip Point Change| |Ambient Based Trip Po|[Enabled]|| |>|>|Allow High Performance| |Allow High Performanc|[Disabled]|| |Intel® Dynamic Power|[Enabled]|| |Current Logical Proce|[Disabled]|| |Start P-State|[P0]|| |Step Size|[25%]|| |CLPM|[OS level]|| |>|>|-| |Supper Debug|[Disabled]|| |>|>|-| |>|>|WWAN Participant| |Enable/Disable WWAN P|[Disabled]|| |WWAN Device Critical|[75 C]|| |WWAN Device Passive T|[40 C]|| |>|>|-| |>|>|Thermal Sampling Period for STR2| |Sampling Period Value|300|| |>|>|-| |>|>|Memory Participant| |>|>|&bold(){Thermal Failsafe Settings}| |BatteryId DBI Base|240|| |BatteryId Analog Base|19|| |VBattery Threshold|3700|| |CAP_Freq_Index|4|| |>|>|-| |PROCHOT# input|[Disabled]|| |Thermal Throttling Me|[Disabled]|| |>|>|Soc AUX3 Threshold| |HOT (TJ_TARGET) Offse|3|| |>|>|Platform AUX3 Thresholds| |Systherm 0 (Skin Hots|110|| |Systherm 1 (Ambient E|110|| |Systherm 2 (Changer-D|110|| |>|>|Platform Critical Thermal Event| #endregion //-----Android----- #region(close,Android) &bold(){Android} |IA_APPS_RUN|3400|| |IA_APPS_CAP|0|| |USE IA_APPS_RUN or CA|[IA_APPS_RUN]|| |Boot on invalid batte|[Enabled]|| |Modem Selection|[7262_ES2XX_SSIC]|| |>|>|-| |>|>|Silent Lake Feature Configuration| |Silent Lake|[Disabled]|| #endregion //-----PCI Subsystem Setting----- #region(close,PCI Subsystem Setting) &bold(){PCI Subsystem Setting} |>|>|AMI PCI Driver Version : A5.01.08| |>|>|PCI Settings Common for all Devices:| |Above 4G Decoding|[Disabled]|| |SR-IOV Supported|[Disabled]|| |Restore PCIE Register|[Disabled]|| |Don't Reset VC-TC Map|[Disabled]|| |>|>|-| |>|>|Change Settings og The Following PCI Devices:| |>|>|-| |>|>|WARNING: Changing PCI Device(s) settings may&br()have unwanted side effects! System May Haqng!&br()PROCEED WITH CAUTION.| #endregion //-----USB Configutation----- #region(close,USB Configutation) &bold(){USB Configuration} |USB Module Version|11|| |USB Controllers:|1 XHCI|| |USB Devices:|2 keybords, 2 Mice|| |>|>|-| |XHCI Hand-off|[Enabled]|| |USB Mass Strage Driver|[Enabled]|| |>|>|-| |>|>|USB hardware delays a| |USB transfer time-out|[20 sec]|| |Device reset time-out|[20 sec]|| |Device power-up delay|[Auto]|| #endregion //-----Platform Trust Technology----- #region(close,Platform Trust Technology) &bold(){TPM Configuration} |fTPM|[Enabled]|| #endregion //-----Security Configuration----- #region(close,Security Configuration) |未作成||| #endregion //-----System Component----- #region(close,System Component *) **System Component |PMIC ACPI OBJECT|[Enabled]|| |Asset SLP_SOIX_N in S|[Auto]|| |>|>|PCIe based WLAN module - BCM4356| |BCM4356|[Disabled]|| |>|>|-| |Power&Perfomance(PNP|[Power&Performance]|| |LPC Pins PNP Setting|[Disabled]|| |XDB GPIO|[Disabled]|| |Flashless Modem|[Disabled]|| |MS Custom Sdbus Drive|[Enabled]|| |Toggle SelfClockDisab|[Disabled]|| |AOS GPS HID Selection|[Broadcom 47521 GPS]|| |CHT-HR setup options|[Disabled]|| |VGG 50mW Workaround|[Enabled]|| |OS IMAGE ID|[Windows 8.1]|| |PSS Storage|[Disabled]|| |>|>|-| |S5-Charging driver|[Enabled]&color(blue){→[Disabled]}|Enabled:シャットダウン(or再起動)&電源接続時にチャージ画面が出る(&color(red){高速充電対応})&br()→&color(red){[Ctrl]+[Alt]+{Del]で起動}&br()&color(blue){Disabled}:&color(blue){電源接続してもチャージ画面にならない(すぐ起動できる)}| |S5 LPM Settings|[Disabled]&color(blue){→[Enabled]}|&color(blue){電源オフ時も充電可能になる}| |>|>|-| |Persistent RAM size|[Disabled]|| |Offline Crash Dump se|[Disabled]|| #endregion #endregion //-----Chipset----- #region(close,Chipset) *Chipset //-----North Bridge----- #region(close,North Bridge) |>|>|&bold(){North Bridge}| |>|>|GOP Configuration| |GOP Driver|[Enabled]|| |>|>|-| |>|>|Intel IGD Configuration| |Integrated Graphics D|[Enabled]|| |>|>|-| |IGD Turbo Enable|[Enabled]|| |Power Meter Lock|[Enabled]|| |Primary Display|[Auto]|| |GFX Boost|[Disabled]|| |PR3 (For Win10 Only)|[Enabled]|| |DVMT Pre-Allocated|[32M]|| |DVMT Total Gfx Mem|[Max]|| |Apeture Size|[512MB]|| |GTT Size|[8MB]|| |IGD Thermal|[Disabled]|| |Spread Spectrum clock|[Disabled]|| |Panel Configuration|[MIPI]|| |MIPI Panel Vender|[LG MIPI]|| |>|>|-| |ISP Enable/Disable|[Enabled]|| |ISP PCI Device Select|[ISP PCI Device as BO...]|| #endregion #endregion //==========Security========== #region(close,Security) *Security |未作成||| #endregion //==========Boot========== #region(close,Boot) *Boot |>|>|&bold(){Boot Configuration}| |Setup Prompt Timeout|1|| |Bootup NumLock State|[On]|| |>|>|-| |Quiet Boot|[Enabled]|| |Fast Boot|[Enabled]|| | SATA Support|[All Sata devices]|| | VGA Support|[EFI Driver]|| | USB Support|[Partial Initial]|| | PS2 Support|[Disabled]|| | Network Stack Driver|[Disabled]|| |>|>|-| |>|>|&bold(){Boot Option Priorities}| |Boot Option #1|Windows Boot Manager|| |Boot Option #2|UEFI: Built-in EFI …|| #endregion //==========Save&Exit========== #region(close,Save&Exit) *Save&Exit |Save Changes and Exit|&color(red){設定後は保存して終了}| |Discard Changes and Exit|| |Save Changes and Reset|| |Discard Changes and Exit|| |>|-| |>|&bold(){Save Options}| |Save Changes|| |Discard Changes|| |Restore Default|&color(red){他項目設定前に実施。}| |Save as User Defaults|| |Restore User Defaults|| |>|-| |>|&bold(){Boot Override}| |UEFI: Built-in EFI Shell|| |Windows Boot Manager|| |Launch EFI Shell from filesystem device|| |Reset System with ME disable Mode|| #endregion #endregion #region(open,BIOS項目一覧 2016/10/18版) *BIOS項目一覧(2016/10/18版) //========== Main ========== 情報無し #endregion #region(open,BIOS項目一覧 2016/09/29版) *BIOS項目一覧(2016/09/29版) //========== Main ========== 情報無し #endregion - うちのGPD WINには10/18版BIOSが入っていました。Mainの項目では、Build Date and Timeが 10/18/2016 17:43:44となっているほかは10/25版と同じでした。 -- 名無しさん (2017-01-16 16:53:57) - 12/23/2016版なんだけどACアダプタつないだままだと電源ONできなくて困ってる -- 名無しさん (2017-02-20 02:49:19) - FAQぐらい読めや -- 名無しさん (2017-02-22 00:05:22) - これほど頭悪い奴はずっと困ってればいいんだよ。 -- 名無しさん (2017-02-22 18:09:02) - 2017/2/21版についての記載を誰か -- 名無しさん (2017-04-19 08:09:25) - 2017/2/21版のBIOSってどこにあるの?公式探ってるが見つからない -- 名無しさん (2017-04-20 02:30:13) #comment
-黒字…初期値にリストアした場合の設定値 -&color(blue){青字}…推奨される設定変更値および解説 -&color(red){赤字}…注意事項または注釈 ※ 誤記や補足説明などありましたら更新お願いします。 ※ 設定変更などでパフォーマンス向上や不具合回避報告がありましたら更新お願いします。 ※ 任意のバージョンへのアップグレード・ダウングレードは対象のアップデータの実行で可能です。 ※ 書き換えに失敗した場合(コンソール赤背景)は再度実行することで修復出来る事があります。 #region(open,BIOS項目一覧 2016/11/18版) *BIOS項目一覧(2016/11/18版) //========== Main ========== #region(close,Main) *Main |>|>|&bold(){BIOS Infomation}| |BIOS Vendor|American Megatrends|| |Core Version|5.011|| |Compliancy|UEFI 2.4; PI 1.3|| |Project Version|1ARXP 0.57 x64|| |Build Date and Time|18/11/2016 16:29:41|&color(red){11/18版の表示}| |>|>|&bold(){CPU Configuration}| |Microcode Patch|362|| |>|>|&bold(){Memory Information}| |Total Memory|4096 MB (DDR3)|| |>|>|&bold(){GOPInformation}| |Intel(R) GOP Driver|8.0.1038|| |>|>|&bold(){TXE Information}| |Sec RC Version|00.05.00.00|| |TXE FW Version|02.00.02.3095|| |>|>|-| |System Language|[English]|| |>|>|-| |System Date|&italic(){[ddd MM/DD/YYYY]}|| |System Time|&italic(){[hh:mm:ss]}|| |>|>|-| |Accsess Level|Administrator|| #endregion //==========Boot========== #region(close,Boot) *Boot |>|>|&bold(){Boot Configuration}| |Setup Prompt Timeout|1|| |Bootup NumLock State|[On]|| |>|>|-| |Quiet Boot|[Enabled]|| |Fast Boot|[Enabled]|| | SATA Support|[All Sata devices]|| | VGA Support|[EFI Driver]|| | USB Support|[Partial Initial]|| | PS2 Support|[Disabled]|| | Network Stack Driver|[Disabled]|| |>|>|-| |>|>|&bold(){Boot Option Priorities}| |Boot Option #1|Windows Boot Manager|| |Boot Option #2|UEFI: Built-in EFI …|| #endregion //==========Save&Exit========== #region(close,Save&Exit) *Save&Exit |Save Changes and Exit|&color(red){設定後は保存して終了}| |Discard Changes and Exit|| |Save Changes and Reset|| |Discard Changes and Exit|| |>|-| |>|&bold(){Save Options}| |Save Changes|| |Discard Changes|| |Restore Default|| |Save as User Defaults|| |Restore User Defaults|| |>|-| |>|&bold(){Boot Override}| |UEFI: Built-in EFI Shell|| |Windows Boot Manager|| |Launch EFI Shell from filesystem device|| |Reset System with ME disable Mode|| #endregion #endregion #region(open,BIOS項目一覧 2016/10/25版) *BIOS項目一覧(2016/10/25版) //========== Main ========== #region(close,Main) *Main |>|>|&bold(){BIOS Infomation}| |BIOS Vendor|American Megatrends|| |Core Version|5.011|| |Compliancy|UEFI 2.4; PI 1.3|| |Project Version|1ARXP 0.57 x64|| |Build Date and Time|10/25/2016 10:43:29|&color(red){10/25版の表示}| |>|>|&bold(){CPU Configuration}| |Microcode Patch|362|| |>|>|&bold(){Memory Information}| |Total Memory|4096 MB (DDR3)|| |>|>|&bold(){GOPInformation}| |Intel(R) GOP Driver|8.0.1038|| |>|>|&bold(){TXE Information}| |Sec RC Version|00.05.00.00|| |TXE FW Version|02.00.02.3095|| |>|>|-| |System Language|[English]|| |>|>|-| |System Date|&italic(){[ddd MM/DD/YYYY]}|| |System Time|&italic(){[hh:mm:ss]}|| |>|>|-| |Accsess Level|Administrator|| #endregion //==========Advanced========== #region(close,Advanced) *Advanced //-----Trusted Compuring----- #region(close,Trusted Compuring) &bold(){Trusted Compuring} |>|>|TPM20 Device Found| |>|>|-| |Security Device Sup|[Enabled]|| |Active PCR banks|S|| |Available PCR Banks|S|| |>|>|-| |TPM State|[Enabled]|| |Pending Operation|[None]|| |Platform Hierarchy|[Enabled]|| |Storage Hierarchy|[Enabled]|| |Endorsement Hierarc|[Enabled]|| |TPM2.0 UEFI Spec Ve|[1.0]|| |TPM 20 InterfaceTyp|[CRB]|| |Device Select|[Auto]|| #endregion //-----ACPI Setting----- #region(close,ACPI Setting) &bold(){ACPI Setting} |Enable ACPI Auto Conf|[Enabled]|| #endregion //-----Serial Port----- #region(close,Serial Port) &bold(){Serial Port} |>|>|&bold(){COM 0}| |Console Redirection|[Disabled]|| |>|>|Condole Redirection Settings| |>|>|-| |>|>|&bold(){Legacy Console Redirection}| |>|>|Legacy Console Redirection Settings| |>|>|-| |>|>|&bold(){Serial Port for Out-ofBand Management/&br()Windows Emergency Management Service (EMS)}| |Console Redirection|[Disabled]|| |>|>|Console Redirection Settings| #endregion //-----CPU Configuration----- #region(close,CPU Configuration) &bold(){CPU Configuration} |>|>|&bold(){Socket 0 CPU Infomation}| |Intel(R) Atom(TM) x7-Z8700 CPU @ 1.60GHz||&color(blue){先行機種一部はx7-Z8750あり}| |>|>|-| |CPU Signature|406c3|| |Microcode Patch|362|| |Max CPU Speed|1600 MHz|| |Min CPU Speed|480 MHz|| |ProcessorCores|4|| |Intel HT Technology|Not Supported|| |Intel VT-x Technology|Supported|| |>|>|-| |L1 Data Cache|24 kB x 4|| |L2 Data Cache|32 kB x 4|| |L2 Cache|1024 kB x 2|| |L3 Cache|Not Supported|| |>|>|&bold(){CPU Thermal Configuration}| |DTS|[Disabled]|| |CPU Speed|1600 MHz|| |64-bit|Supported|| |>|>|-| |Limit CPUID Maximum|[Disabled]|| |Bi-directional PROCHO|[Enabled]|| |Intel Virtualization|[Enabled]|| |Power Technology|[Energy Efficient]|| #endregion //-----PPM Configuration----- #region(close,PPM Configuration *) **PPM Configuration |EIST|Enabled|| |CPU C State Report|Enabled|| |Max CPU C-state|C7&color(blue){→C6またはC1}|&color(blue){10/25より前のBIOSではスリープ中の電源断回避可能}| |SOix|Enabled|| #endregion //-----Thermal----- #region(close,Thermal) &bold(){Thermal} |>|>|&bold(){Thermal Configuration}| |>|>|Thermal Configuration Parameters&br()Dynamic Platform&Thermal Framework| |DPTF|[Enabled]|| |>|>|-| |Intel® DPTF Processor|[Enabled]|| |Critical Trip Point|[90 C]|| |Passive Trip Point|[85 C]|| |>|>|-| |>|>|Intel® DPTF Skin Hotspot Proxy Senser| |Intel® DPTF Skin Hots|[Enabled]|| |Critical|[90 C]|| |Passive|[57 C]|| |>|>|-| |>|>|Intel® DPTF Ambient Estimation Participant| |Intel® DPTF Ambient E|[Disabled]|| |Critical|[85 C]|| |Passive|[52 C]|| |>|>|-| |>|>|Intel® DPTF Charger-Display Senseor Participa...| |Intel® DPTF Changes-d|[Enabled]|| |Critical|[85 C]|| |Passive|[52 C]|| |>|>|-| |>|>|Intel® DPTF Charger Bord Senser Participant| |Charger Board Sensor|[Disabled]|| |Critical|[85 C]|| |Passive|[61 C]|| |>|>|-| |>|>|Intel® DPTF Charger Participant| |Intel® DPTF Charger P|[Enabled]|| |>|>|Intel® DPTF Display Participant| |Intel® DPTF Display P|[Enabled]|| |Display High Limit|100|| |Display Low Limit|40|| |>|>|Intel® DPTF Power Participant| |Intel® DPTF Power Par|[Enabled]|| |>|>|-| |>|>|Intel® Ambient Temperture Participant| |Intel® Ambient Temper|[Enabled]|| |Ambient Constant Sign|[+]|| |Ambient Constant 0|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 1|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 2|30|| |Ambient Constant Sign|[+]|| |Ambient Constant 3|0|| |Ambient Constant Sign|[+]|| |Ambient Constant 4|0|| |Ambient Constant Sign|[+]|| |Ambient Constant 5|0|| |>|>|-| |>|>|Ambient Based Trip Point Change| |Ambient Based Trip Po|[Enabled]|| |>|>|Allow High Performance| |Allow High Performanc|[Disabled]|| |Intel® Dynamic Power|[Enabled]|| |Current Logical Proce|[Disabled]|| |Start P-State|[P0]|| |Step Size|[25%]|| |CLPM|[OS level]|| |>|>|-| |Supper Debug|[Disabled]|| |>|>|-| |>|>|WWAN Participant| |Enable/Disable WWAN P|[Disabled]|| |WWAN Device Critical|[75 C]|| |WWAN Device Passive T|[40 C]|| |>|>|-| |>|>|Thermal Sampling Period for STR2| |Sampling Period Value|300|| |>|>|-| |>|>|Memory Participant| |>|>|&bold(){Thermal Failsafe Settings}| |BatteryId DBI Base|240|| |BatteryId Analog Base|19|| |VBattery Threshold|3700|| |CAP_Freq_Index|4|| |>|>|-| |PROCHOT# input|[Disabled]|| |Thermal Throttling Me|[Disabled]|| |>|>|Soc AUX3 Threshold| |HOT (TJ_TARGET) Offse|3|| |>|>|Platform AUX3 Thresholds| |Systherm 0 (Skin Hots|110|| |Systherm 1 (Ambient E|110|| |Systherm 2 (Changer-D|110|| |>|>|Platform Critical Thermal Event| #endregion //-----Android----- #region(close,Android) &bold(){Android} |IA_APPS_RUN|3400|| |IA_APPS_CAP|0|| |USE IA_APPS_RUN or CA|[IA_APPS_RUN]|| |Boot on invalid batte|[Enabled]|| |Modem Selection|[7262_ES2XX_SSIC]|| |>|>|-| |>|>|Silent Lake Feature Configuration| |Silent Lake|[Disabled]|| #endregion //-----PCI Subsystem Setting----- #region(close,PCI Subsystem Setting) &bold(){PCI Subsystem Setting} |>|>|AMI PCI Driver Version : A5.01.08| |>|>|PCI Settings Common for all Devices:| |Above 4G Decoding|[Disabled]|| |SR-IOV Supported|[Disabled]|| |Restore PCIE Register|[Disabled]|| |Don't Reset VC-TC Map|[Disabled]|| |>|>|-| |>|>|Change Settings og The Following PCI Devices:| |>|>|-| |>|>|WARNING: Changing PCI Device(s) settings may&br()have unwanted side effects! System May Haqng!&br()PROCEED WITH CAUTION.| #endregion //-----USB Configutation----- #region(close,USB Configutation) &bold(){USB Configuration} |USB Module Version|11|| |USB Controllers:|1 XHCI|| |USB Devices:|2 keybords, 2 Mice|| |>|>|-| |XHCI Hand-off|[Enabled]|| |USB Mass Strage Driver|[Enabled]|| |>|>|-| |>|>|USB hardware delays a| |USB transfer time-out|[20 sec]|| |Device reset time-out|[20 sec]|| |Device power-up delay|[Auto]|| #endregion //-----Platform Trust Technology----- #region(close,Platform Trust Technology) &bold(){TPM Configuration} |fTPM|[Enabled]|| #endregion //-----Security Configuration----- #region(close,Security Configuration) |未作成||| #endregion //-----System Component----- #region(close,System Component *) **System Component |PMIC ACPI OBJECT|[Enabled]|| |Asset SLP_SOIX_N in S|[Auto]|| |>|>|PCIe based WLAN module - BCM4356| |BCM4356|[Disabled]|| |>|>|-| |Power&Perfomance(PNP|[Power&Performance]|| |LPC Pins PNP Setting|[Disabled]|| |XDB GPIO|[Disabled]|| |Flashless Modem|[Disabled]|| |MS Custom Sdbus Drive|[Enabled]|| |Toggle SelfClockDisab|[Disabled]|| |AOS GPS HID Selection|[Broadcom 47521 GPS]|| |CHT-HR setup options|[Disabled]|| |VGG 50mW Workaround|[Enabled]|| |OS IMAGE ID|[Windows 8.1]|| |PSS Storage|[Disabled]|| |>|>|-| |S5-Charging driver|[Enabled]&color(blue){→[Disabled]}|Enabled:シャットダウン(or再起動)&電源接続時にチャージ画面が出る(&color(red){高速充電対応})&br()→&color(red){[Ctrl]+[Alt]+{Del]で起動}&br()&color(blue){Disabled}:&color(blue){電源接続してもチャージ画面にならない(すぐ起動できる)}| |S5 LPM Settings|[Disabled]&color(blue){→[Enabled]}|&color(blue){電源オフ時も充電可能になる}| |>|>|-| |Persistent RAM size|[Disabled]|| |Offline Crash Dump se|[Disabled]|| #endregion #endregion //-----Chipset----- #region(close,Chipset) *Chipset //-----North Bridge----- #region(close,North Bridge) |>|>|&bold(){North Bridge}| |>|>|GOP Configuration| |GOP Driver|[Enabled]|| |>|>|-| |>|>|Intel IGD Configuration| |Integrated Graphics D|[Enabled]|| |>|>|-| |IGD Turbo Enable|[Enabled]|| |Power Meter Lock|[Enabled]|| |Primary Display|[Auto]|| |GFX Boost|[Disabled]|| |PR3 (For Win10 Only)|[Enabled]|| |DVMT Pre-Allocated|[32M]|| |DVMT Total Gfx Mem|[Max]|| |Apeture Size|[512MB]|| |GTT Size|[8MB]|| |IGD Thermal|[Disabled]|| |Spread Spectrum clock|[Disabled]|| |Panel Configuration|[MIPI]|| |MIPI Panel Vender|[LG MIPI]|| |>|>|-| |ISP Enable/Disable|[Enabled]|| |ISP PCI Device Select|[ISP PCI Device as BO...]|| #endregion #endregion //==========Security========== #region(close,Security) *Security |未作成||| #endregion //==========Boot========== #region(close,Boot) *Boot |>|>|&bold(){Boot Configuration}| |Setup Prompt Timeout|1|| |Bootup NumLock State|[On]|| |>|>|-| |Quiet Boot|[Enabled]|| |Fast Boot|[Enabled]|| | SATA Support|[All Sata devices]|| | VGA Support|[EFI Driver]|| | USB Support|[Partial Initial]|| | PS2 Support|[Disabled]|| | Network Stack Driver|[Disabled]|| |>|>|-| |>|>|&bold(){Boot Option Priorities}| |Boot Option #1|Windows Boot Manager|| |Boot Option #2|UEFI: Built-in EFI …|| #endregion //==========Save&Exit========== #region(close,Save&Exit) *Save&Exit |Save Changes and Exit|&color(red){設定後は保存して終了}| |Discard Changes and Exit|| |Save Changes and Reset|| |Discard Changes and Exit|| |>|-| |>|&bold(){Save Options}| |Save Changes|| |Discard Changes|| |Restore Default|&color(red){他項目設定前に実施。}| |Save as User Defaults|| |Restore User Defaults|| |>|-| |>|&bold(){Boot Override}| |UEFI: Built-in EFI Shell|| |Windows Boot Manager|| |Launch EFI Shell from filesystem device|| |Reset System with ME disable Mode|| #endregion #endregion #region(open,BIOS項目一覧 2016/10/18版) *BIOS項目一覧(2016/10/18版) //========== Main ========== 情報無し #endregion #region(open,BIOS項目一覧 2016/09/29版) *BIOS項目一覧(2016/09/29版) //========== Main ========== 情報無し #endregion

表示オプション

横に並べて表示:
変化行の前後のみ表示: